Drexel SLT30AC/SLT35AC

High Capacity and Specialty


Drexel SLT30AC/SLT35AC

High Capacity and Specialty


Overview
Features
Specs
Downloads & Documentation
Drexel SwingMast® Rear Wheel Drive/Steer VNA Warehouse Forklift

The Drexel model SLT30AC and SLT35AC work in aisles as narrow as 56" (1.4M), have a basic capacity of 3,000 lbs. (1363kg) or 3,500 lbs. (1590kg) at 24" (600mm) load center and lift heights available to 26' (7.92M).

The SLT30AC and SLT35AC are 3-wheel front/side loading VNA forklifts with a single smooth rubber rear-drive/steer tire and solid poly-front load tires. The front mast rotates 90° and has side shift of 20” (500mm), allowing stacking easily in Very Narrow Aisles. Both models can work inside and outside on paved surfaces, can perform the jobs of a normal front loading forklift (including loading and unloading highway trucks and containers, working in bulk storage, drive in rack, push back rack, double deep and climbing steep ramps). The SLT range does the jobs of reach and counterbalanced trucks in aisles over 50% smaller. The rear steering and drive allow turning in short-cross aisles further increasing the storage density when compared to counterbalanced trucks.

Exceptional Performance and Maneuverability

The SLT30AC and SLT35AC have fast lift/lower and travel speeds with a tight turning radius providing excellent maneuverability and productivity. The roll out battery compartment allows fast battery changes for multi-shift operations. High Visibility three and four stage masts are available for a wide range of applications including those with low overhead obstructions still requiring high lift heights. Wire Guidance is a standard option on this model allowing safe full-speed travel in the narrowest aisles.

Maximizes Material Handling Productivity

The versatile SLT30AC and SLT35AC forklifts replace conventional reach and counterbalanced forktrucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, operate in very narrow aisles in warehouses, replacing reach and counterbalanced trucks that require much wider aisles. All tires on both models are 18" (457mm) diameter and the truck has great underclearance for avoiding floor obstructions.

*Based on 48” (1200mm) long x 40” (1000mm) wide load.

Features
  • Single Joystick Controls Hydraulic Functions, Directional Control, Horn and Wire Guidance
  • An Electro/Mechanical Parking Brake is Automatically Applied When Power is Turned Off or the Operator Leaves the Seat
  • Electronic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
  • Three-Wheel Design, Single Rear-Wheel Drive and Steering Provide Excellent Maneuverability and Traction
  • Ergonomic Design for Exceptional Operator Comfort and Safety
  • The Adjustable Swivel Seat Improves Operator Comfort while Traveling in Reverse
  • 3,000 lb. (1363kg) and 3,500 lb. (1590kg) Capacity at 24
  • High Visibility Mast Allows Optimum Safety and View of Loads and Forks
  • Cab Floor Height: 31 in / 787 mm
  • Capacity: 3000 lbs / 1361 kg
  • Chassis Width: 45.5 in / 1156 mm
  • Control Type (Traction and Hydraulic) : AC
  • Fork Carriage Width: 31 in / 787 mm
  • Gradeability Loaded: 10%
  • Lift Motor Rating: 12 kW
  • Lift Speed Loaded: 95 fpm / 29 mpm
  • Lift Speed Unloaded: 110 fpm / 33.5 mpm
  • Load Center: 24 in / 600 mm
  • Lost Load Center: 23 in / 584 mm
  • Lowering Speed Loaded: 80 fpm / 24.4 mpm
  • Lowering Speed Unloaded: 75 fpm / 22.8 mpm
  • Mast Shift: 20 in / 508 mm
  • Mast Tilt: FWD/RWD: 3/4 degrees
  • Overall Length to Face of Forks: 89 in / 2260 mm
  • Overhead Guard Height: 87 in / 2210 mm
  • Power Source: 48 Volt Battery
  • Seat Height: 50.75 in / 1289 mm
  • Side Reach: 3 in / 76 mm
  • Standard Forks (ITA Class II): 40x4x1.5 in / 1016x101x38 mm
  • Steer Motor Rating: 1.1 kW
  • Traction Motor Rating: 12 kW
  • Travel Speed Loaded: 6 mph / 9.7 kph
  • Travel Speed Unloaded: 7 mph / 11.3 kph
  • Turning Radius: 67 in / 1702 mm
  • Underclearance: 4.5 in / 114 mm
  • Weight with Battery: 13225 lbs / 5999 kg
  • Wheel Sizes (rear 1 each): 18x7x12.1 in / 457x178x307 mm
  • Wheel Sizes (front 2 each) : 18x9x12.1 in / 457x229x307 mm
  • Wheelbase: 56 in / 1422 mm
Overview
Drexel SwingMast® Rear Wheel Drive/Steer VNA Warehouse Forklift

The Drexel model SLT30AC and SLT35AC work in aisles as narrow as 56" (1.4M), have a basic capacity of 3,000 lbs. (1363kg) or 3,500 lbs. (1590kg) at 24" (600mm) load center and lift heights available to 26' (7.92M).

The SLT30AC and SLT35AC are 3-wheel front/side loading VNA forklifts with a single smooth rubber rear-drive/steer tire and solid poly-front load tires. The front mast rotates 90° and has side shift of 20” (500mm), allowing stacking easily in Very Narrow Aisles. Both models can work inside and outside on paved surfaces, can perform the jobs of a normal front loading forklift (including loading and unloading highway trucks and containers, working in bulk storage, drive in rack, push back rack, double deep and climbing steep ramps). The SLT range does the jobs of reach and counterbalanced trucks in aisles over 50% smaller. The rear steering and drive allow turning in short-cross aisles further increasing the storage density when compared to counterbalanced trucks.

Exceptional Performance and Maneuverability

The SLT30AC and SLT35AC have fast lift/lower and travel speeds with a tight turning radius providing excellent maneuverability and productivity. The roll out battery compartment allows fast battery changes for multi-shift operations. High Visibility three and four stage masts are available for a wide range of applications including those with low overhead obstructions still requiring high lift heights. Wire Guidance is a standard option on this model allowing safe full-speed travel in the narrowest aisles.

Maximizes Material Handling Productivity

The versatile SLT30AC and SLT35AC forklifts replace conventional reach and counterbalanced forktrucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, operate in very narrow aisles in warehouses, replacing reach and counterbalanced trucks that require much wider aisles. All tires on both models are 18" (457mm) diameter and the truck has great underclearance for avoiding floor obstructions.

*Based on 48” (1200mm) long x 40” (1000mm) wide load.

Features
Features
  • Single Joystick Controls Hydraulic Functions, Directional Control, Horn and Wire Guidance
  • An Electro/Mechanical Parking Brake is Automatically Applied When Power is Turned Off or the Operator Leaves the Seat
  • Electronic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
  • Three-Wheel Design, Single Rear-Wheel Drive and Steering Provide Excellent Maneuverability and Traction
  • Ergonomic Design for Exceptional Operator Comfort and Safety
  • The Adjustable Swivel Seat Improves Operator Comfort while Traveling in Reverse
  • 3,000 lb. (1363kg) and 3,500 lb. (1590kg) Capacity at 24
  • High Visibility Mast Allows Optimum Safety and View of Loads and Forks
Specs
  • Cab Floor Height: 31 in / 787 mm
  • Capacity: 3000 lbs / 1361 kg
  • Chassis Width: 45.5 in / 1156 mm
  • Control Type (Traction and Hydraulic) : AC
  • Fork Carriage Width: 31 in / 787 mm
  • Gradeability Loaded: 10%
  • Lift Motor Rating: 12 kW
  • Lift Speed Loaded: 95 fpm / 29 mpm
  • Lift Speed Unloaded: 110 fpm / 33.5 mpm
  • Load Center: 24 in / 600 mm
  • Lost Load Center: 23 in / 584 mm
  • Lowering Speed Loaded: 80 fpm / 24.4 mpm
  • Lowering Speed Unloaded: 75 fpm / 22.8 mpm
  • Mast Shift: 20 in / 508 mm
  • Mast Tilt: FWD/RWD: 3/4 degrees
  • Overall Length to Face of Forks: 89 in / 2260 mm
  • Overhead Guard Height: 87 in / 2210 mm
  • Power Source: 48 Volt Battery
  • Seat Height: 50.75 in / 1289 mm
  • Side Reach: 3 in / 76 mm
  • Standard Forks (ITA Class II): 40x4x1.5 in / 1016x101x38 mm
  • Steer Motor Rating: 1.1 kW
  • Traction Motor Rating: 12 kW
  • Travel Speed Loaded: 6 mph / 9.7 kph
  • Travel Speed Unloaded: 7 mph / 11.3 kph
  • Turning Radius: 67 in / 1702 mm
  • Underclearance: 4.5 in / 114 mm
  • Weight with Battery: 13225 lbs / 5999 kg
  • Wheel Sizes (rear 1 each): 18x7x12.1 in / 457x178x307 mm
  • Wheel Sizes (front 2 each) : 18x9x12.1 in / 457x229x307 mm
  • Wheelbase: 56 in / 1422 mm
Downloads & Documentation

Other High Capacity and Specialty Models